60A F405 Fly Tower
This 60A F405 Fly Tower uses imported chip (not a domestic inferior product), tested continuous current of 60A, strong explosive power, burst current of 65A,with a cost-effectiveness that surpasses Sp**bee, 30,000+ pcs in stock.
It is equipped with BLHELI_S (C_H_25) 60A four-in-one ESC and F405 flight control, Installation hole spacing of 30.5 * 30.5mm.F405 flight controller is equipped with 6 UARTs, MP6500 MCU, OSD and many other functions!Built-in plug-in allows you to easily connect to the DJI FPV Air System.Integrated 16Mb black box, barometer, upgraded Type-C USB interface, greatly improve socket life and reduce the risk of poor contact. Supports various receivers including Sbus,ELRS,PPM, CRSF, DSMX, iBus, DUMD, etc.
60A F405 Fly Tower Specifications：
| ESC | FC |
| Firmware :BLHELI_S (C_H_25) PC Configruator link: esc-configurator.com Continuous Current: 60A*4 Burst Current: 65A(5S) TVS Protective diode: YES(30V TVS) External Capacitor : 1000uF Low ESR Capacitor ESC Protocol : DSHOT 300/600 Power Input: 3-6S LIPO Power Output: VBAT Current Sensor: Support(Scale=386 Offset=0) Mounting:30.5*30.5(4mm hole diameter) Dimension:40(W)*45(L)*7(H)mm Weight: 14.0 g |
MCU:STM32F405RGT6,168MHz,1MB Flash Gyro-1 MP6500 (SPI1) CW=90 Blackbox： SPI FLASH 16M OSD:AT7456E (SPI2) Baro：SPL06-001(SPI2) Support Betaflight Dual BEC:5V 2.5A(Max 3A)&9V 2.5A(Max 3A) Voltage sensor (Scale 110) 4x LEDs for 5V,3.3V,9V,FC Work SH1.0-6pin,DJI/Vista/O3 socket SH1.0-8pin,ESC socket SH1.0-4pin,ELRS Revicer (USART2) 6xUarts(1,2,3,4,5,6)&1x I2C Onboard 30V TVS Weight: 7.6g PC Configner link：github.com/betaflight |
F405 60A User Manual_2403
Reviews
There are no reviews yet.